Set blood oxygen probe and processing display module in one body
The product has the advantages of small volume, light weight and convenient carrying.
The product is simple and convenient to use, low power consumption
Numerical value of blood oxygen saturation
Pulse rate value, bar chart display
Pulse waveform display
You can change the display mode of the 4 direction change
Automatic shutdown function: in the measurement of interface condition, the measured finger off within 5S after the automatic shutdown
Display mode: 1.1 inch color OLED display screen
Display resolution: 96*64
Accuracy: 70% ~ 100%: + 2%, no less than 70% definitions
The measuring range of the pulse rate: 30bpm ~ 250bpm (1bpm resolution)
Accuracy: + 2bpm or + 2% large value
Weak perfusion error: in pulse filling ratio is 0.4%, oximetry can correctly display the oxygen saturation and pulse rate value, oxygen saturation error is + 4%; pulse rate error + 2bpm or + 2% take large values.
Ambient light interference resistance ability: under indoor natural light and the existing lighting source of oxygen measurements and measurement under the condition of a darkroom value deviation less than + 1% compared to
Power consumption: less than 30 mA
Working voltage: DC 3.0V
Batteries: 2 AAA 1.5V alkaline batteries
Battery working hours: 20 hours minimum sustainable work, the theoretical value is 32
Safety type: internal power supply equipment, BF application part
Net weight: 50g
1×Finger Pulse Oximeter (Battery not included)
There are no batteries inside, you need install 2 "AAA" batteries by yourself.
Don’t measure blood pressure during vehicle running.